|
|
Build Your Online Product Catalogs?
| Product Name: |
Additive flame retardant and thermal conductivity silicone seala
|
| Supply Ability: |
|
| Related proudcts |
potting, electronic adhesive, |
| Specifications |
50KG/ (A 25kg/ B 25kg/ plastic barrels, plastic barrels) |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Additive flame retardant and thermal conductivity silicone sealant
HT-9802 A/B
HT-9802 A/B is a two-component silicone potting heat addition system, has the following characteristics:
1, rubber at room temperature after mixing with longer storage time, but under the condition of heating can be fast curing, particularly conducive to the use of automatic production line.
2, high temperature resistance, high temperature resistance and good aging. After curing (-50 to 200 DEG C) temperature range of silicone rubber elasticity, excellent insulating properties.
3, curing shrinkage, anti aging performance more excellent waterproof, moisture-proof and.
4, with thermal conductivity flame retardant, flame retardant properties of UL94-V0.
A typical use: used for sealing protection of high power electronic components, higher requirements on the heat dissipation and temperature of the power module and the circuit board. Such as encapsulating module, auto HID lamp power supply module, auto ignition system power supply module, solar panels, transformers, sensors etc..
Two, the technical parameters:
The performance index of HT-9802 A component HT-9802 B component
Before curing white viscous black viscous body
Viscosity (CPS) of 1500 ~ 30001500 ~ 3000
The relative density (g/cm3) of 1.50 ~ 1.65 and 1.50 ~ 1.65
Group A: group B (weight ratio) 1:1
Curing type bi component additive
The mixed viscosity (CPS) from 1500 to 3000
The operating time of (min) 0.5h
The appearance of black elastomer cured
The curing conditions (HR) or 3~4h/25 0.5h/80 DEG C
Solid
Chemical
The hardness (Shore A 24hr) 45 + 5
Tensile strength (***) is more than or equal to 1
Waterproof grade is greater than or equal to IP67
Coefficient of thermal expansion (PPM) is less than or equal to 220
Using temperature range (c) -50 ~ 200
Volume resistivity (omega - 1 * 1016 cm)
Dielectric strength (kV/ - mm) is greater than or equal to 23
The dielectric constant (1.2MHz) of 2.9
The thermal conductivity of W/ (m, K = 0.60).
Flame retardant gra |
| Company: |
The city of Dongguan and the new material limited co***ny
|
| Contact: |
Mr. tao liu |
| Address: |
Southern District Industrial Village Dalingshan Town Zhenhua Road Stone Building 1 floor B No. 2 |
| Postcode: |
|
| Tel: |
86-0769-88966661 |
| Fax: |
86-0769-88962111 |
| E-mail: |
|
|
|
|
Home
